What Is an RFID PET Card?

An RFID PET card is a contactless smart card that combines a PET-based card construction with an embedded RFID chip and antenna. Depending on the selected technology, the card can support identification, access control, membership, transportation, NFC interaction and other smart-card applications.

RFID PET cards can be produced with different LF, HF/NFC or UHF technologies and chip configurations. The appropriate card construction depends on the reader system, operating frequency, application requirements and desired personalization.

For projects that require a specific RFID system, buyers can provide their existing card, reader model or technical requirements so the appropriate chip and card configuration can be evaluated before mass production.

RFID PET Card Specifications

Final specifications depend on the selected RFID chip, antenna design, card construction and application requirements.

RFID & NFC Chip Options

Different RFID systems require different chip technologies. Selecting the correct chip is therefore one of the most important steps before card production.

LF RFID Cards

LF RFID technology is commonly used for identification and access-control applications.

Suitable chip options can be selected according to the customer's existing reader and system requirements.

HF / NFC RFID Cards

HF and NFC cards typically operate at 13.56 MHz and are widely used for access control, identification, membership, loyalty, transportation and smartphone-interactive applications.

Available chip families may include:

· MIFARE

· MIFARE DESFire

· MIFARE Ultralight

· NTAG

· ICODE

UHF RFID Cards

UHF RFID technology can be considered for applications that require longer-range identification, depending on the reader, antenna and operating environment.

UCODE and other compatible UHF chip configurations can be evaluated for project requirements.

Need Help Selecting a Chip?

Send us your reader model, existing RFID card, chip requirement or system specification.

Our team can review the application and recommend a suitable RFID card configuration for sample testing before bulk production.

PET vs PVC vs PETG RFID Cards

Choosing the right card material depends on the application, production process and sustainability requirements.

The best material should be selected according to the required durability, printing process, environmental objectives, card construction and target application.

For composite cards, buyers should evaluate the complete card construction, rather than assuming that one material characteristic automatically applies to the finished card.

Custom RFID PET Card Manufacturing

Every RFID card project can have different technical and branding requirements. We support customization according to the required card specification.

Card Size & Thickness

Standard CR80 cards are available, with customized dimensions and thickness options for suitable projects.

RFID Chip Selection

Choose the RFID or NFC chip according to your existing reader, security requirements, memory requirements and application.

Custom Printing

Your card can be customized with:

· Brand logo

· Full-color artwork

· Product information

· Variable data

· Serial numbers

· QR codes

· Barcodes

Surface & Finishing

Different surface treatments and finishing options can be evaluated according to the required appearance, printing method and application.

Encoding & Personalization

For projects requiring personalized RFID cards, encoding and variable-data services can be arranged according to the selected chip and customer data requirements.

Custom Packaging

Cards can be packed according to project, distribution or brand requirements.

RFID PET Card Applications

Access Control

RFID PET cards can be configured for building access, employee identification and other RFID access-control systems.

Employee & ID Cards

Suitable for organizations that require contactless identification combined with printed employee or identification information.

Membership & Loyalty

Custom RFID/NFC cards can combine physical branding with contactless identification and digital interaction.

Transportation

RFID cards can be configured for transportation and ticketing applications according to the required RFID technology and system.

NFC Marketing

NFC-enabled PET cards can connect physical cards with digital content, landing pages or other customer-defined online experiences.

Events & Identification

Custom RFID cards can be used for event identification, access management and contactless interactions.

RFID PET Card Manufacturing Process

A reliable RFID card supplier should control more than the final printing process. Card construction, RFID integration, personalization and final inspection all affect the performance of the finished product.

1. Specification Review

We review the required material, card dimensions, RFID technology, chip, printing and personalization requirements.

2. Chip & Inlay Verification

The selected RFID chip and inlay configuration are checked against the project specification.

3. Card Production

The card layers, RFID inlay and other components are assembled according to the approved construction.

4. Printing & Personalization

Approved artwork, numbering, QR codes, barcodes and other variable information are applied according to the production specification.

5. RFID Testing

RFID functionality and card performance can be checked according to the selected technology and project requirements.

6. Encoding Verification

For encoded cards, data can be checked against the approved encoding requirements.

7. Final Quality Inspection

Finished cards are inspected for appearance, dimensions, personalization and RFID-related requirements before packing.

8. Packaging & Shipment

Approved cards are packed according to the order requirements and prepared for international shipment.

RFID PET Card Quality Control

Quality control should cover both the physical card and the embedded RFID technology.

Physical Inspection

· Card dimensions

· Thickness

· Surface finish

· Printing quality

· Color consistency

· Logo position

· QR and barcode readability

RFID Inspection

· Chip identification

· RFID functionality

· Read/write performance where applicable

· Encoding verification

· Batch consistency

Pre-Production Testing

For system integration projects, samples can be tested with the customer's existing readers or systems before moving to bulk production.

This helps identify chip compatibility or card-construction issues before a large production run.

Why Choose Kaisere Technology for RFID PET Cards?

Direct Manufacturing Support

Kaisere Technology provides RFID card manufacturing and customization support for international B2B customers.

Custom Project Capability

We can evaluate card material, dimensions, RFID technology, chip selection, printing, personalization and packaging according to project requirements.

RFID Technology Options

Our product range supports multiple RFID and NFC chip families, allowing buyers to select a configuration appropriate for their existing system.

Quality-Controlled Production

Production should be controlled from material and chip verification through card manufacturing, personalization and final inspection.

Sample Testing Before Bulk Production

For projects where RFID compatibility is critical, samples can be evaluated with the customer's existing reader or system before large-scale production.

Global B2B Supply

We support international orders for RFID system integrators, distributors, brands and other professional buyers.

For recurring projects, specifications can be documented and maintained to improve consistency between production batches.

What Should You Provide When Requesting an RFID PET Card Quote?

To receive a more accurate quotation and technical recommendation, please provide as much of the following information as possible:

· Required card quantity

· Card size

· Card thickness

· RFID frequency

· Preferred chip

· Existing reader or system

· Printing artwork

· QR code or barcode requirements

· Encoding requirements

· Packaging requirements

· Delivery destination

· Target delivery schedule

If you are unsure which chip or material to select, simply send us your application requirements or an existing RFID card sample.

Our team can help identify the appropriate configuration before production.

RFID PET Card FAQ

Q1:What is an RFID PET card?

An RFID PET card is a contactless smart card made with a PET-based card construction and an embedded RFID chip and antenna. It can be configured for LF, HF/NFC or UHF applications depending on the selected technology and chip.

Q2:What RFID chips are available for PET cards?

Available options can include MIFARE, MIFARE DESFire, MIFARE Ultralight, ICODE, UCODE and other RFID/NFC chips, depending on the required frequency, protocol and application.

Q3:Can RFID PET cards be customized?

Yes. Card size, thickness, RFID chip, printing, surface finish, numbering, QR codes, barcodes, encoding and packaging can be customized according to the project specification.

Q4:Can I test RFID PET card samples before bulk production?

Yes. For system integration projects, sample cards can be provided for testing with the customer's existing reader or RFID system before proceeding with mass production.

Q5:What is the standard size of an RFID PET card?

The standard card format is CR80, approximately 85.5 × 54 mm. Customized dimensions can be evaluated for specific projects.

Q6:Can you provide pre-encoded RFID PET cards?

Pre-encoding or personalization can be supported according to the selected RFID chip and project data requirements. Buyers should provide the required data format and encoding specifications for evaluation.