Product News
NTAG 223/224 DNA StatusDetect for Medical Packaging | Kaisere
NTAG 223/224 DNA StatusDetect for Smart Medical and Pharmaceutical Packaging
NTAG 223 DNA StatusDetect and NTAG 224 DNA StatusDetect are NFC integrated circuits from NXP Semiconductors that combine AES-128 Secure Unique NFC (SUN) message authentication with conductive or capacitive tamper detection and passive capacitive sensing. Integrated into a suitable label, inlay, seal or closure, they can help a medical or pharmaceutical package present authenticated identity data and an electronic indication of opening or a designed sensing condition when read by a compatible NFC device. The final result depends on the antenna, external tamper or sensing structure, package construction, calibration and verification workflow.
Discuss a custom NFC packaging project:Contact Kaisere Technology.

What Does NTAG 223/224 DNA StatusDetect Add to Medical Packaging?
NTAG 223/224 DNA StatusDetect is designed to add three functions to a passive NFC tag:
·Cryptographic tag authentication: AES-128-protected SUN messages help a verification system check dynamic tag data rather than relying only on a static printed code or UID.
·Electronic tamper-status detection: a conductive loop or capacitive structure can be designed to indicate that a seal, closure or tagged package has been opened or disturbed.
·Battery-free capacitive sensing: an external sensing structure can convert a physical change, such as moisture exposure or liquid-level movement, into a capacitance change that the IC can measure when powered by an NFC field.
These functions answer different questions. Authentication asks whether the NFC message is cryptographically valid. Tamper detection asks whether a physical loop or capacitance value has changed beyond a configured condition. Sensing records a capacitance measurement that an application can interpret. A complete packaging system may combine these functions, but the tag IC alone does not provide a finished backend, regulatory workflow or validated medical measurement.
How Does StatusDetect Work in a Smart Packaging Workflow?
1. The NFC field powers the tag. A compatible 13.56 MHz NFC reader or phone energizes the passive IC. No dedicated battery is required for the tag IC’s NFC operation.
2. The tag checks the configured physical structure. In conductive mode, the IC checks continuity of a tamper loop. In capacitive mode, it measures an external capacitance and compares the result with configured limits.
3. The tag makes status data available. Depending on the selected configuration, tamper information can be included in the tag response or mirrored into user memory as part of the NFC data flow.
4. The verification workflow checks the message. SUN data protected with AES-128 can be submitted to a verification application or service for cryptographic checking. The application can then present the product identity and relevant status information to an authorized user.
The NFC IC provides the secure interface and sensing functions; the product database, key-management process, user interface and business rules must be defined for the project.
Conductive vs. Capacitive NFC Tamper Detection
The two tamper modes are not interchangeable. Select the mode according to the package geometry, the opening mechanism and the physical change that must be detected.
Design factor | Conductive tamper detection | Capacitive tamper detection |
Detection element | A conductive loop routed across a seal, label or opening point. | An external capacitor or electrode arrangement connected to the IC sensing interface. |
Status change | Breaking the loop changes its electrical continuity. The once-open status can be stored irreversibly in the IC. | The measured capacitance is compared with configured limits. A change beyond the limits can set the tamper status. |
Typical packaging fit | Carton sealing labels, tear strips, security seals and labels attached across a package opening. | Bottle caps, closures and physical package forms where electrode position or spacing changes during opening. |
Main design work | Loop routing, break point, label placement, adhesive behaviour and reliable electrical interruption. | Electrode geometry, external capacitance, mechanical tolerances, calibration and threshold setting. |
Validation focus | Confirm the loop is intact before opening and reliably records an opened state after the intended break event. | Confirm closed/open measurements remain distinguishable across package tolerances and expected environmental conditions. |
For a carton or label that crosses a tear line, a conductive loop is often the simpler concept to evaluate first. For a bottle closure or integrated physical form, a capacitive design may be more suitable. The selected construction still requires prototype testing on the actual package.
See Kaisere’stamper-evident NFC labels with NTAG DNA authenticationandKaisere anti-counterfeit NFC tagsfor related tamper-evident and authentication label options.
Medical and Pharmaceutical Packaging Applications
1. Medicine Cartons and Tamper-Evident Labels
A custom NFC label can be positioned across a carton flap or other opening point. A conductive loop can be routed through the area that must be broken during opening. When the loop is interrupted, the tag can record the once-open status. An NFC tap can then expose the tag’s authenticated identity and tamper information to the configured verification workflow.
This is an additional electronic status layer. It does not, by itself, replace any market-specific packaging safety feature or serialization requirement.
2. Medicine Bottles, Caps and Closures
A capacitive tamper design can be considered when the sensor structure is integrated into a closure or another physical part of the package. Opening or moving the closure can change the relationship between the sensing electrodes and therefore the measured capacitance. The design team must define the closed and open states, electrode placement, mechanical tolerance and calibration limits.
3. Diagnostic Reagent Kits and Medical Consumables
NFC authentication and tamper status can be used to connect a reagent kit, test-strip package or disposable medical product to digital product information and an opening-status check. If moisture-related condition sensing is required, the package needs a suitable external sensing structure or dielectric material whose capacitance changes in a repeatable way.
For adjacent use cases, read secure NFC tags for medical consumablesandNFC vs UHF RFID vs GS1 DataMatrix for medical consumables.
4. Liquid Packaging and Fill-Level Sensing
For a suitable bottle, cartridge or dose-delivery package, external electrodes can be designed so that a change in liquid level alters the measured capacitance. The NFC reader powers the tag during a tap, and the application interprets the resulting measurement against project-defined limits. Electrode location, liquid properties, container wall, fill geometry and calibration all affect feasibility.
5. Moisture-Sensitive Packaging Concepts
A moisture-responsive dielectric or external capacitive element may be evaluated where moisture exposure is an important package condition. This requires a defined sensing material and validation against the intended moisture range, packaging barrier and storage environment.
NTAG 223 DNA StatusDetect vs. NTAG 224 DNA StatusDetect
Both ICs provide the StatusDetect function, AES-128-protected SUN message authentication and the same core NFC interface. The main selection differences are user memory and the method used to protect memory access.
Selection point | NTAG 223 DNA StatusDetect | NTAG 224 DNA StatusDetect |
IC model | NT2H2331S0 | NT2H2421S0 |
User memory | 144 bytes | 208 bytes |
Memory access protection | 32-bit password protection | AES-128 three-pass mutual authentication |
StatusDetect modes | Conductive tamper, capacitive tamper and capacitive sensing | Conductive tamper, capacitive tamper and capacitive sensing |
Suitable selection logic | Consider when 144 bytes and password-based access protection meet the project requirements. | Consider when the project needs the additional 64 bytes or AES-based mutual authentication for protected memory access. |
NTAG 224 automatically gives better tamper detection accuracy. The tamper and sensing performance also depends on the external structure and its calibration. For a broader chip-selection discussion, seeNTAG 223 DNA vs NTAG 224 DNA chip comparisonandNTAG 223/224 DNA NFC card options.
Key Technical Specifications
Parameter | NTAG 223 DNA StatusDetect | NTAG 224 DNA StatusDetect |
Chip manufacturer | NXP Semiconductors | |
IC model number | NT2H2331S0 | NT2H2421S0 |
Operating frequency | 13.56 MHz | |
Communication standard | ISO/IEC 14443-A | |
NFC tag type | NFC Forum Type 2 Tag | |
Data rate | 106 kbit/s | |
UID | 7-byte UID | |
User memory | 144 bytes | 208 bytes |
SUN message authentication | AES-128 protected | |
Originality signature | 48-byte ECC-based originality signature (NXP configurable feature) | |
Memory access protection | 32-bit password | AES-128 mutual authentication |
Status detection | Conductive or capacitive tamper detection | |
Capacitive sensing | Up to 11 pF measurement range; up to 64 steps of resolution | |
Power | Passive NFC-powered operation; no dedicated battery required for the tag IC | |
Data retention | 10 years | |
Write endurance | 100,000 cycles | |
Security evaluation | Common Criteria EAL3+ (AVA_VAN.2), as stated by NXP | |
Technical note: NXP lists a 50 pF RF input capacitance for the IC. This is not the same as the external capacitive sensing range of up to 11 pF. Sensor design should follow NXP’sAN12999 capacitive-sensing guidelines. The 11 pF range and 64-step resolution are chip-level measurement specifications, not a guaranteed moisture, pressure or liquid-level accuracy for a finished package.
Custom NFC Label and Inlay Integration
A StatusDetect IC must be matched with a physical NFC construction and a package-specific sensing design. Depending on the application and engineering review, a custom project may include:
·Selection of NTAG 223 DNA StatusDetect or NTAG 224 DNA StatusDetect.
·HF antenna layout and integration into a label, sticker, inlay or security seal.
·Conductive tamper-loop routing across a carton flap, seal or opening feature.
·Capacitive electrode or external capacitor design for a closure or sensing application.
·Label dimensions, shape, substrate, adhesive and release-liner selection to suit the package surface and converting process.
·Logo, variable data, QR code, serial number and other agreed print elements.
·UID association, NDEF data encoding and SUN-related configuration according to the project specification.
·Prototype samples and NFC communication or functional checks against agreed acceptance criteria.
Backend software, cryptographic key provisioning, cloud verification and regulatory validation should be scoped separately with the project owner or its solution partner unless they are explicitly included in the supply agreement. Explore custom NFC tags, labels and stickersandcustom NTAG 223/224 DNA NFC inlays for OEM label productionfor related OEM tag and inlay formats.
For related smart packaging applications, see NTAG 223/224 DNA for anti-counterfeiting and smart packaging.
What Buyers Should Confirm Before Ordering
1. Package format: carton, bottle, cap, closure, reagent kit, pouch or another medical consumable package.
2. Required function: product authentication, first-opening detection, capacitive tamper detection, moisture-related sensing or liquid-level sensing.
3. Chip choice: NTAG 223 or NTAG 224, based on memory, access protection and system requirements.
4. Physical construction: antenna dimensions, sensor electrode or loop layout, substrate, adhesive, label size and placement.
5. Reader and verification workflow: target NFC phones or readers, NDEF format, key management, backend verification and user interface.
6. Operating environment: expected temperature, humidity, handling, transport, sterilization exposure if applicable, and package surface conditions.
7. Order requirements: prototype quantity, target annual volume, encoding or personalization requirements, packaging format and requested delivery schedule.
Before bulk production, request a representative prototype and agree on test criteria. A useful pilot should check NFC readability on the intended package, correct intact/open status behaviour, capacitance calibration where applicable, adhesive and material compatibility, production-process tolerance and repeatability across samples.
Regulatory and Application Boundaries
NTAG 223/224 DNA StatusDetect can add a digital authentication or electronic status layer, and it can be presented as a replacement for mandatory pharmaceutical serialization, UDI marking, a legally required anti-tampering feature or validated medical-device controls. In the European Union, the Falsified Medicines framework requires a unique identifier and an anti-tampering device on the outer packaging of most prescription medicines; the exact scope and implementation must be checked for the product and market.
GS1 DataMatrix is used in healthcare for product identification and can carry data elements such as GTIN, batch or lot number, expiry date and serial number where applicable. NFC can complement a barcode-based identification process, but the two technologies have different roles and should be mapped to the applicable regulatory and operational requirements.
The StatusDetect IC is not a ready-made temperature logger, sterility indicator or validated medical sensor. Any sensing claim must be supported by the complete external sensing construction, calibration method, environmental testing and application validation.
Frequently Asked Questions
What is NTAG 223/224 DNA StatusDetect?
It is an NXP NFC IC family that combines AES-128 SUN message authentication, conductive or capacitive tamper detection and passive capacitive sensing. NTAG 223 provides 144 bytes of user memory; NTAG 224 provides 208 bytes and AES-128 mutual authentication for memory access.
Does NTAG 223/224 DNA StatusDetect need a battery?
No dedicated battery is required for the tag IC’s passive NFC operation. The NFC reader or phone supplies the RF field during a read. A connected application or backend may still be needed to interpret measurements and verify cryptographic messages.
What is the difference between conductive and capacitive tamper detection?
Conductive detection checks a loop that is broken when the package is opened. Capacitive detection measures an external capacitor or electrode structure and compares the value with configured limits. Conductive loops are commonly suited to labels and seals; capacitive structures can be integrated into physical forms such as closures.
Can StatusDetect measure moisture or liquid fill level?
It can support project-specific passive capacitive sensing when an external structure converts a change in moisture, dielectric properties or liquid level into a measurable capacitance change. The sensing material, electrodes, calibration, thresholds and interpretation software must be designed and validated for the application.
Which chip should I choose for pharmaceutical packaging?
Choose NTAG 223 when 144 bytes and 32-bit password protection are sufficient. Consider NTAG 224 when the project needs 208 bytes or AES-128 three-pass mutual authentication for memory access. Both provide the StatusDetect modes; final selection should be confirmed against the reader, data and backend requirements.
Can Kaisere customize StatusDetect labels for cartons, bottles or reagent kits?
Kaisere can review OEM requirements for NFC labels, inlays, stickers and security seals. Feasibility depends on the package, antenna and sensor geometry, material stack, reader workflow and validation criteria. Send the package drawing and functional requirements for a technical review.
Request a Quote for a Custom StatusDetect NFC Packaging Project
Share your package type, target chip, tamper-detection method, sensing objective, label dimensions and estimated order quantity. Kaisere Technology can review the proposed NFC construction and discuss sample evaluation requirements for your medical or pharmaceutical packaging project.
Request a Quote / Contact Kaisere Technology
For background on related solutions, exploreNTAG 223/224 DNA pharmaceutical packaging authentication, secure NFC tags for medical consumablesandtamper-evident NFC labels with NTAG DNA authentication.

+86-18873022339
+86-(0)755-82619866
info@chinaiccard.com